Your Settling Pool Deck Is a Soil Problem, Lift It Without Replacing the Concrete
Ground Up lifts and levels settled pool deck slabs across Middle Tennessee safely and without demolition.
Not sure which fix applies to your situation? Browse our full range of solutions for concrete repair.
[ 01 ] Watch For These Signs
Signs Your Pool Deck Is Settling
Sections Lower Than Adjacent Slabs
Slabs that have dropped below their neighbors create lips and edges that are barefoot trip hazards, especially dangerous where wet surfaces already compromise footing.
Gaps Opening at the Pool Coping
When pool deck slabs settle away from the coping edge, gaps allow water to flow directly beneath the deck, accelerating further settlement and potentially eroding material toward the pool shell.
Water Pooling on the Deck Surface
Settlement changes the slope of deck sections, causing water to pond where it previously drained. Standing water on a pool deck is both a safety issue and a clear sign that drainage geometry has shifted.
Cracking at Slab Joints
As slabs settle independently, the joints between them crack open. These cracks admit water directly to the sub-base, accelerating the erosion cycle and worsening settlement over time.
When a pool is excavated, the surrounding soil is disturbed and backfilled. This backfill is rarely compacted to the density of undisturbed native soil, meaning it will consolidate under load for years. Pool deck concrete poured over this fill has a high probability of settling as the fill densifies.
Pool decks are constantly exposed to water from splash-out, filter backwash, and rain runoff. This water infiltrates through deck joints and cracks, gradually eroding the sub-base beneath. Over time, the erosion creates voids that allow slabs to drop.
Middle Tennessee's red clay soils expand when wet and contract when dry. Repeated expansion and contraction seasons displace the soil beneath the pool deck, creating settlement conditions even in areas where the original fill was reasonably compacted.
Inadequate drainage causes water to pond and saturate the sub-base near the pool. Prolonged saturation softens the soil and allows it to migrate away from beneath the slab, particularly toward the pool shell excavation.
[ 03 ] Recommended Solutions
How Ground Up fixes this
[ 04 ] Regional Context
Why Middle Tennessee foundations fail
Middle Tennessee's expansive clay soils shrink in dry summers and swell after rain, cycling significantly in volume. Davidson, Williamson, and Rutherford County homes built on this clay face ongoing movement pressure. Ground Up diagnoses and permanently stabilizes foundations across the region.
Pool deck settlement is one of the easier calls for us, the slab is almost always sound, the sub-base has just lost its support. Foam lifting puts it back where it belongs in a couple of hours and the homeowner is swimming again that afternoon. Derek Veselich, Owner, Ground Up Foundation Repair
[ 05 ] Why Ground Up
The difference is in the diagnosis
Get several quotes and you'll see a wide range of prices. The gap isn't luck. It's whether the contractor finds the actual cause and stands behind the work.
- In-house certified crews: we never subcontract your repair
- Optional independent third-party engineer review on larger jobs
- Honest three-tier triage: we tell you what can wait, in writing
- Family owned from the same Shelbyville Highway address since 2009
[ 06 ] FAQ
Settling or Sinking Pool Deck questions
Yes. Polyurethane foam lifting does not require the pool to be drained. The foam is injected through small ports in the deck slab and expands beneath the concrete, it does not enter the pool shell or affect the water. The pool can remain filled throughout the repair.
Our technicians evaluate the relationship between each settled slab and the pool shell before injecting foam. We use controlled injection volumes and monitor elevation throughout the lift to prevent overpressure. Polyurethane foam's controlled expansion allows precise, incremental lifting.
Lifting is almost always preferable when the slab is structurally intact. Replacing pool deck concrete requires demolition, removal, and a full cure period of 7 to 14 days before use. Polyurethane foam lifting is completed in hours and the deck is ready the same day, at roughly 60 to 80 percent less cost than replacement.
Most residential pool deck lifting projects in the Nashville and Murfreesboro area are completed in two to four hours. No waiting period is required, the deck is ready for normal use the same day.
More Problem Signs
Other signs to watch for
Cracked Concrete Driveways and Patios
Concrete cracks are one of the most common exterior problems homeowners in Middle Tennessee encounter. A freshly poured slab looks pristine, but within a few years the combination of expansive red clay soil, heavy rainfall, freeze-thaw cycles, and vehicle loads almost inevitably produces cracks of some kind. Not all cracks are equal: hairline surface cracks are often cosmetic, while wide, growing, or offset cracks signal deeper structural movement. Understanding what type of crack you have determines whether sealing alone will solve the problem or whether the slab also needs to be lifted and stabilized before sealing.
Cracking or Failed Expansion Joints
Expansion joints, the planned gaps between concrete slab sections, are designed to allow the concrete to move with temperature and moisture changes without cracking. When the flexible sealant in these joints fails, cracks form, or the joint edges chip and deteriorate, the joints become open pathways for water to enter directly beneath the concrete. In Middle Tennessee, where annual rainfall averages 47 inches and temperature swings drive significant concrete movement, joint maintenance is critical to long-term concrete performance. Failed expansion joints are not just a cosmetic problem, they are the single most common entry point for the water erosion that leads to slab settlement.
Gaps Between Concrete Slabs
Gaps that open between adjacent concrete slabs, at driveways, sidewalks, patios, and pool decks, are an early indicator of slab movement and a direct water infiltration pathway. Unlike expansion joints, which are designed gaps filled with flexible material, unplanned gaps form when one or both slabs move horizontally or settle vertically. These gaps allow water to flow directly beneath the concrete, eroding the sub-base and creating voids that eventually cause the slab to sink and crack further. In Middle Tennessee, where seasonal clay soil movement is significant, gaps that appear small in spring may widen substantially by fall as the soil contracts beneath the slabs.
Patio Settlement and Sinking
Patio settlement occurs when the concrete slab or slabs forming an outdoor living area sink unevenly into the soil below, producing a surface that is no longer level and no longer drains properly. In Middle Tennessee, patios are particularly vulnerable because they are typically installed on or near grade, often with less sub-base preparation than driveways, and may receive concentrated water runoff from roof downspouts, drainage swales, and garden beds. The region's red clay soils compound the problem: they hold water, swell during wet seasons, and then contract significantly during dry summers, destabilizing the soil support beneath the patio slab. What starts as a slight tilt or a new crack often progresses to a noticeable bowl or step pattern if left unaddressed.
Concrete Pitting, Flaking, and Staining
Pitting, flaking, spalling, and staining are concrete surface deterioration issues that range from cosmetic to moderately structural depending on severity and depth. In Middle Tennessee, these problems are most commonly caused by freeze-thaw cycling, chemical exposure from de-icing salts, oil and fluid contamination from vehicles, and the natural aging of concrete surfaces. While surface deterioration rarely affects the structural load-bearing capacity of a slab in its early stages, untreated deterioration accelerates: pitting and spalling expose the concrete aggregate and reinforcing steel to moisture, increasing the rate of damage and eventually compromising the slab's surface integrity. Addressing surface deterioration early with appropriate sealing or resurfacing is far less costly than full slab replacement.
Sinking or Sunken Driveway
A sinking driveway is one of the most visually obvious signs of concrete settlement, yet many homeowners delay repairs because the slab itself appears intact. The problem is almost always below the surface: soil that was once compact and load-bearing has washed away, compressed under weight, or contracted during a dry season, creating a void that allows the heavy concrete slab to shift downward. In Rutherford, Davidson, Williamson, and Wilson Counties, the native red clay soil is especially prone to this cycle, swelling with winter rains and shrinking back during summer droughts, never quite returning to the same position. Over time, sections of the driveway sink independently, creating lips, slopes, and drainage problems that worsen every year.
Seeing these signs in your home?
We'll find the cause and tell you honestly what it needs, free.