Active Water Ejection That Keeps Your Basement Dry Even During Heavy Storms

Most sump pump motors have a service life of seven to ten years under normal conditions. Pumps that run frequently due to high groundwater or large drainage systems may wear faster. We recommend testing your pump annually and replacing it proactively before it fails rather than waiting for a storm to reveal the problem.

Yes, in most cases. Nashville area storms that generate the heaviest basement water intrusion are the same storms that cause power outages. A battery backup system activates automatically when the primary pump loses power, keeping your basement protected when conditions are at their worst.

Discharge piping routes water from the basin through your foundation wall and out to a point away from the home, typically the yard, a storm drain, or a drainage swale. Proper discharge placement is critical. Water discharged too close to the foundation can re-enter the system.

Sump pumps are designed to manage water that drains into the basin through an interior perimeter drainage system, not to pump out a basement that has already flooded with standing water across the floor. If your basement has flooded, a wet vacuum or submersible utility pump is needed first.

You can test your sump pump by slowly pouring water into the basin until the float activates and the pump runs. Listen for smooth, consistent motor operation and verify water is discharging properly through the outlet pipe. If the pump hums but does not pump, makes grinding noises, or does not activate at all, schedule an inspection.